Modes of Operation

LP-C01 supports both transparent mode and gateway mode. In transparent mode, communication can occur via RS485 or Ethernet, with the communication data being directly forwarded without processing, thereby maintaining data integrity and real-time performance, making it suitable for applications that require rapid responses. In gateway mode, it can communicate with remote I/O devices such as LP-M01/M02/M03/M04, the PLC controller can collect or control RTU via Modbus.
LP-M01+ and LP-M02 can be configured as remote synchronous switch modes, enabling switch input and remote synchronous switch output.

P2P Communications-Transparent Mode

Configure two LP-C01 in a P2P link to provide fast and reliable communications for up to 20miles.

P2MP Communications-Transparent Mode

Use wireless connections in situations where communication is required and installing cable is neither cost-effective nor practical.

Co-Located Communications-Transparent Mode

Generally, when there are multiple radios at the same site, the transmission from one radio can easily overpower the weaker signals (from up to 20 miles away) that a nearby radio is trying to receive.

Star Communications-Transparent Mode

The LP-C01 network system can be used for Rs485 or Modbus TCP communication networks, and can be configured to create wireless transparent transmission networks.

Remote Monitoring and Control with LP-C01 -Gateway Mode

The M01 and M02 modules are capable of efficiently detecting AI/DI signals and outputting DO signals. AI/DI data can be periodically transferred to the LP-C01 at predefined intervals. In addition, the user can configure the AI upper and lower alarm thresholds, which will immediately send an alarm or drive the DO output when the specified range is exceeded.

P2P Communications-Remote Synchronous Switch Modes

LP-M01+ and LP-M02 can be configured as remote synchronous switch modes, enabling switch input and remote synchronous switch output.

P2MP Communications-Remote Synchronous Switch Modes

Use wireless connections in situations where communication is required and installing cable is neither cost-effective nor practical.

Extend teleprotection beyond 20 miles-Remote Synchronous Switch Modes

Generally, when there are multiple radios at the same site, the transmission from one radio can easily overpower the weaker signals (from up to 20 miles away) that a nearby radio is trying to receive.

Features & Benefits:

1.

Flexible Monitoring Application

Employ Contact inputs from remote existing devices to the Control house or central PLC location without the need for cables, digging trenches, or adding conduit for cables.  Encrypted communications provide secure and reliable communication.

2.

Easy Integration

LP-M01 supports battery as a power source to facilitate remote installation locations. It expands the availability of any remote hardwired input contact status via the Modbus output. Combine the LP-M01& C-01 with any PLC / Automation Controller for Binary inputs applications.

3.

High Dependability

Debounce support in both software and hardware. Communications monitoring will alarm for low battery, interrupted communication, or any comm loss.

4.

Improved Safety & Data Transfer Reliability

Secured and encrypted wireless communications. Replace control wiring to outside cabinets with wireless antenna, eliminating paths for dangerous voltages.

5.

Savings on Cost

Reduce project costs and time using wireless communication instead of traditional wired applications. This can be achieved with no trench and raceway requirements, less labor for design, documentation, installation, testing, and maintenance. Additionally, with the Modbus communication, this device can be used for virtually any application in the automation and control industry.

Contact:

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

Keep in Touch
If you have any questions or ideas about our products and services,please feel free to contact us!

Email
support@lpsensortech.com

Phone
+1-949-269-3078