Industrial IoT Digital Input Module

The LP-M01 Module is an encrypted wireless “LoRa” IO module with 4 dry contact digital inputs and 4 wet contact digital inputs(10-250VDC). The 3 wet contact inputs support Counter Inputs. It can communicate with LP-C01 receiver for Modbus input/output. The LP-C01 wirelessly controls LP-M01 modules via Modbus TCP or Modbus RTU for any SCADA or Control System client. Each LP-C01 will support up to 128 LP-M01 Modules.

Product Details

LoRa Wireless Transmission Mode

The LP-C01 wirelessly controls LP-M01 modules via Modbus TCP or Modbus RTU for any SCADA or Control System client. Each LP-C01 will support up to 128 LP-M01 Modules.

Remote Synchronous Switch Modes

The LP-M01+ and LP-M02 are versatile input and output modules that communicate using the 915Mhz frequency
band radio spectrum. LP-M01+ and LP-M02 can be configured as remote synchronous switch modes, enabling
a hardwired switch input and remote synchronous switch output.An LP-M01+ input supports two operational
modes: P2P (point-to-point) with a single LP-M02 for output synchronization, and also P2MP (point-to-multipoint)
from one LP-M01+ to multiple LP-M02 outputs..

LP-M01 IO Function

The LP-M01 Module is an encrypted wireless “LoRa” IO module with 8 Total Binary Inputs, 4 internal wetted inputs for dry contacts and 4 inputs for any wetted contacts (10-250 VDC),Among these, 3 out of the 4 wet contacts can be configured as pulse input counters. It can communicate with LP-C01 receiver for Modbus input/output.

Application

Power Supply:
12/24 V
10-30VDC, 3 Watts maximum

48/125V
36-200Vdc or 85-140 Vac 3 Watts maximum

125/250 V
85–300 Vdc or 85–264 Vac, 3 Watts maximum

Battery supply mode:
12VDC low power mode
3-year maximum battery life supported

Communications Interface:
Input latency：<100ms
Wireless communication encryption： AES128 with customized authorization key support.
Output Protocol: MODBUS TCP & MODBUS RTU

Wireless Frequency：915MHZ
Antenna： External
Channel： Single

Port： USB-C (setting port & firmware update)

Maximum wireless communication range:
1 mile

Digital Input Ratings:
Internal Wetted Voltage:
12VDC
Input Voltage Range: (add details for input voltage/AC input)
9-300VDC (the input voltage will be set per project requirement)

Operating Temperature：
–20°C to +65°C (–4°F to +149°F)

Dimensions：
6.05″L*4.5″W*2.4″H
154.59(mm)L*83.7(mm)W* 60.96(mm)H

Weight：
405g

Product Specifications

LP-M01 datasheet

LP-M01 Register Address Table

Product User Manual

LP-M01 User_Manual

Equipment Docking Guidance

LP-C01 Device Docking Documentation

Docking equipment video

Configuration Software