Industrial IoT Analog Input & Digital Output Module

Power Supply:

10-30VDC, 3 Watts maximum

Digital Output Ratings:

Contact configuration:

    2 NC or 4 NO contacts

Rated current:

    5 A

Rated voltage / Max switching voltage AC:

    240/400 VAC

Maximum breaking capacity AC:

    1250 VA

Mechanical endurance:

    15×106 cycles

Rated frequency of operation with/without load:

    6/1200 min

Contact ratings:

Load Cycles

    5 A, 250 VAC, resistive, 85°C, 6 cycles/min, 50% df, EN61810-1 1×105

    5 A, 30 VDC, resistive, on NO-contact, 85°C, 6 cycles/min, 50% duty factor, EN61810-1, 1×105

    5 A, 240 VAC resistive load, on NO or NC contact, UL508 1×105

Analog Input Ratings:

Current: 4-20mA (Range: 0-27mA)

Voltage: 0-10V (Range: 0-12.8V)

Accuracy: 0.25%

Communications:

Input latency：<100ms

Output latency: <200ms when under normal wireless environment

Wireless communication encryption：

AES-128bit custom authorization key support.

Output Protocol:

• LoRa Based encrypted wireless communication
• MODBUS TCP & MODBUS RTU (via LP-C01)

Supported LoRa Wireless Frequencies：

    915MHz (US), 868 MHz (EU)

Antenna：

    External

Channel：

    Single

Maximum wireless communication range:

    2.5 mile (with 4db Antenna installed)

USB Port：

    USB-C (For settings & firmware update only)

Operating Temperature：

    –40°C to +85°C (–40°F to +185°F)

Weight

    427g

Dimensions：

    6.05″L*4.5″W*2.4″H

    154.59(mm)L*83.7(mm)W* 60.96(mm)H