LP-M04 Industrial Wireless Switch
Product Overview
LP-M04 supports the use of a battery as a power source to facilitate remote installation locations. It expands the availability of any remote hardwired input contact status via the Modbus output. Combine the LP-M02& C-01 with any PLC / Automation Controller for Binary inputs applications.
Description
LP-M03 with LoRa wireless technology implements secure 128-bit encryption with embedded signals that can control and monitor via the Modbus client. With a very low power consumption and a wireless communication range between an LP-C01 and an LP-M03 of up to 2 miles, it would significantly reduce material, design, and labor costs when compared to a traditional hard-wired solution.
SPECIFICATION
Power Supply:
90-277VAC, 50/60hz
3*Switch Output:
3 Digital Output: 0-277VAC, 10A, 70 °C
3*Digital Inputs:
3 Binary Inputs for any wetted contacts
1*Analog Input:
1 Current Analog Input: 4-20mA
1*Analog Output:
1 Voltage Analog Output: 0-10V for Dimming control
Input Ratings:
10-30VDC (externally wetted contacts)
Analog Input Ratings:
Range: 0-27mA
Accuracy: 0.25%
Analog Output Ratings:
Range: 0-12V
Accuracy: 0.25%
Communications:
Input latency: 100ms
Wireless communication encryption: AES128 with custom
authorization key support.
Output Protocol:
• LoRa Based encrypted communication
• MODBUS TCP & MODBUS RTU (via LP-C01)
Supported LoRa Wireless Frequencies:
915MHz (US), 868 MHz (EU)
Antenna: External
Channel: Single (72 Channels selectable)
Maximum wireless communication range:
2.5 mile (with 4db Antenna installed)
USB Port: UART 3Pin Cable (For settings & firmware update
only)
Operating Temperature:
–20°C to +70°C (–4°F to +158°F)
Dimensions:
8.1”L*1.77”W*2.17”H
205.74(mm)L*45(mm)W* 55(mm)H
Weight:
405g
Documents
Please login to download PDF Documents.
Related products
IoT Sensors
IoT Sensors
IoT Sensors
IoT Sensors
Industrial Sensors
IoT Sensors